Exhibitor List
| Company | XINGZHE (NINGBO)AUTOMATION CO.,LTD |
| Country | China |
| Category | Waste incineration Dust removal |
| Hall | 9.2 |
| Booth | C09 |
| Website | www.nb-xingzhe.cn |
| Introduce | Xingzhe (Ningbo) Automation Co., Ltd. (hereinafter referred to as "the company") The company is mainly engaged in pneumatic components and dust removal products of the "Xingzhe pneumatic" brand. Including (electromagnetic pulse valve, pulse injection controller, cylinder, air source treatment parts, pneumatic hammer, pneumatic vibrator) and other products. The company's products are widely used in environmental protection equipment, crushing treatment, lithium battery manufacturing, pharmaceutical industry |
Products
| Electromagnetic pulse valve Pulse solenoid valve, also known as diaphragm valve, is a pulse bag or cartridge dust collector ash cleaning jet system compressed air "switch", controlled by the pulse injection controller output signal, the filter bag row by row (chamber) spray cleaning, so that the resistance of the dust collector is kept within the set range, to ensure the processing capacity and dust collection efficiency of the dust collector. Electromagnetic pulse valve in the pulse dust collector plays a very important role, the working principle of electromagnetic pulse valve is to use the pulse of electricity into mechanical pulsation, so that the pulsating gas of the powerful energy into momentum, in a short time released to produce huge impulse, in order to achieve the purpose of cleaning the filter bag. The standard electromagnetic pulse valve is generally made of aluminum alloy die-casting, the appearance is polished, oxidized, frosted, black topcoat treatment, after surface treatment, it has good anti-corrosion performance. The upper part of the electromagnetic pulse valve has an electromagnetic pilot head, the electromagnetic pilot head is composed of high-efficiency magnetic materials and stainless steel magnetic insulation materials, the springs and fasteners are made of stainless steel, and the valve has a pressure-resistant diaphragm inside. |
 |
| cylinder The cylinder is generally composed of parts such as the cylinder barrel, front cylinder head, rear cylinder head, piston, piston rod, seals and fasteners, and the cylinder barrel and the front and rear cylinder heads are fastened and locked by four screws. There is a piston connected to the piston rod in the cylinder, and the piston is equipped with a piston seal. In order to prevent air leakage and the ingress of external dust, the front cylinder head is equipped with piston rod seals and dustproof seals. This double-acting cylinder is divided by the piston into two chambers: a rod cavity (referred to as head or front cavity) and a rodless cavity (referred to as tail or rear cavity). A chamber with a piston rod is called a rod cavity, and a chamber without a piston rod is called a rodless cavity. When compressed air is input from the air chimney at the end of the rodless cavity, if the force of air pressure acting on the left end face of the piston overcomes various reaction forces such as motion friction and load, when the piston advances, the air in the rod cavity is discharged through the end of the chimney, so that the piston rod extends out. Similarly, when compressed air is fed into the rod cavity end air, the piston rod retracts to its initial position. Through the alternating intake and exhaust of the rodless cavity and the rod cavity, the piston rod extends and retracts, and the cylinder achieves reciprocating linear motion. |
 |
| Pneumatic vibrator percussion hammer Pneumatic vibrator, the use of air compressor discharge of high-pressure gas through the gas pipe into the product inlet, when the gas pushes the piston up, the piston upper gas chamber is squeezed, the squeezed gas is discharged through the exhaust hole. When the piston goes up to the end, the gas automatically switches the ventilation direction through the slot and the air passage, so that the gas enters the upper chamber of the piston. The high-pressure gas pushes the piston down to the end of the first cycle, the second cycle begins, and the continuous reciprocating cycle causes the vibrator to translate and shake, thereby generating vibration force |
 |
| Filter regulator The air source treatment piece is used to enter the pneumatic instrument of the air source purification filtration and depressurization to the rated air source pressure supplied by the instrument, of which the air filter is used to clean the air source, which can filter the moisture in the compressed air and avoid moisture entering the device with the gas. The pressure reducing valve stabilizes the pressure of the air source, so that the air source is in a constant state, which can reduce the damage to hardware such as valves or actuators when the air pressure of the air source changes abruptly. The lubricator lubricators lubricate the moving parts of the body, which can lubricate the parts that are inconvenient to add lubricating oil, greatly extending the service life of the body. |
 |
| Solenoid valve The solenoid valve is a step-by-step action direct pilot operated solenoid valve, which can be divided into normally closed solenoid valve and normally open solenoid valve according to the different open and closed states when the power is cut off. Normally closed solenoid valve, after the coil is energized, the armature first drives the sub-valve plug under the action of electromagnetic force to lift, the fluid on the main valve cup flows away through the sub-valve, reducing the pressure acting on the main valve cup, when the pressure on the main valve cup is reduced to a certain value, the armature drives the main valve disc, and uses the pressure difference to make the main valve cup open, the medium flow. After the coil is de-energized, the electromagnetic force disappears, and the armature is reset due to its own weight. At the same time, depending on the medium pressure, the main and auxiliary valves can be closed tightly. Normally open solenoid valve, after the coil is energized due to the suction effect, the moving iron core is moved down, the sub-valve plug is pressed down, the sub-valve is closed, the pressure in the main valve cup rises, when the pressure rises to a certain value, the upper and lower pressure difference of the main valve cup is the same, due to the electromagnetic force, the moving iron core pushes the main valve valve cup down, presses the main valve seat, and the valve is closed. When the coil is powered off, the electromagnetic suction force is zero, the sub-valve plug and the moving iron core are lifted up due to the action of the spring, the sub-valve is opened, the fluid on the main valve disc flows away through the sub-valve, reducing the pressure acting on the main valve cup, when the pressure on the main valve disc is reduced to a certain value, the pressure difference is used to push the main valve disc up, the solenoid valve opens, and the medium flows. |
 |